Re: [Jack-Devel] jackd2 bus error on openwrt

PrevNext  Index
DateTue, 18 Aug 2015 10:57:08 +0200
From Adrian Knoth <[hidden] at drcomp dot erfurt dot thur dot de>
ToMatt Flax <[hidden] at flatmax dot org>
CcJack devel <[hidden] at lists dot jackaudio dot org>
In-Reply-ToMatt Flax Re: [Jack-Devel] jackd2 bus error on openwrt
Follow-UpMatt Flax Re: [Jack-Devel] jackd2 bus error on openwrt 
On Tue, Aug 18, 2015 at 05:19:47PM +1000, Matt Flax wrote:

Hi!

> I have found that on this embedded platform, they don't define
> __arm__ they define __mips__ below is the output from /proc/cpuinfo.

Because it's not an ARM CPU, but a MIPS.

> I have a patch for jack1, however I am not sure that packing is the
> problem ... how can I tell?

You search for __arm__ in the code and change this to __mips__,
recompile and report back. ;)

You might be the first person in the world to run it on such a CPU. I
didn't bother to check if the CPU has a real FPU or just uses
SoftFloats, so performance may or may not be terrible.

Good luck!

-- 
mail: [hidden]  	http://adi.thur.de	PGP/GPG: key via keyserver
PrevNext  Index

1439888237.30972_0.ltw:2, <20150818085708.GJ25041 at ltw dot loris dot tv>