[Jack-Devel] jack1 and MIPS architecture

I can now start jackd 1 on a MIPS 24Kc architecture.

When I try to do anything - even probe the sample rate, it dies with Bus 
Error :
creating alsa driver ... hw:0|hw:0|1000|16|48000|0|2|nomon|swmeter|-|32bit

jack_samplerate ....
Bus error

Even when I use the dummy driver :
jackd -ddummy
creating dummy driver ... dummy_pcm|48000|1024|21333|2|2

jack_samplerate ....
Bus error

I have tried to use gdb and gdbserver, but it is non trivial as the 
binaries are stripped ... even when I use gdb remotely with a 
non-stripped binary, still don't get any sensible information.

I have run jackd with -v and here is what I get - bus error - when I run 
jack_lsp
... snip ...
start poll on 4 fd's
server thread back from poll
polling sync client netjack
++ jack_sort_graph
client event poll on 12 for netjack starts at 1156835181
back from client event poll after 515 usecs
client event poll on 12 for netjack starts at 1156835803
back from client event poll after 224 usecs
++ jack_rechain_graph():
+++ client is now netjack active ? 1
client netjack: start_fd=7, execution_order=0.
client event poll on 12 for netjack starts at 1156836279
back from client event poll after 457 usecs
client netjack: wait_fd=9, execution_order=1 (last client).
-- jack_rechain_graph()
-- jack_sort_graph
client event poll on 12 for netjack starts at 1156836908
back from client event poll after 389 usecs
client event poll on 12 for netjack starts at 1156837389
back from client event poll after 269 usecs
client event poll on 12 for netjack starts at 1156837788
back from client event poll after 298 usecs
start poll on 4 fd's
load = 5.5052 max usecs: 2206.000, spare = 18627.000
load = 7.8695 max usecs: 2132.000, spare = 18701.000
load = 11.4493 max usecs: 3131.000, spare = 17702.000
server thread back from poll
new client: lsp, uuid = 8589934595 type 2 @ 0x7720e000 fd = 14
start poll on 5 fd's
server thread back from poll
new client lsp using 15 for events
start poll on 5 fd's
server thread back from poll
marking client lsp with SOCKET error state = Not triggered errors = 0
waking server thread
non-POLLIN events on fd 14
trying to lock graph to remove 1 problems
we have problem clients (problems = 1
++ Removing failed clients ...
client lsp error status 10000000
removing failed client lsp state = Not triggered errors = 10000000
removing client "lsp"
removing client "lsp" from the processing chain
+++ deactivate lsp
before: client list contains 3
removed from client list, via matching UUID
after: client list contains 2
lock-driven null cycle
Bus error



Matt

1439966831.32345_0.ltw:2, <55D42664.2010309 at flatmax dot org>