Re: [Jack-Devel] routing alsa through jack
In data martedì 24 dicembre 2013 15:25:32, Dominique Michel ha scritto:
> That doesn't tell much. Can you post your configuration inclusive
> aplay -l output
> /etc/modprobe.d/sound.conf content (or whatever file is appropriated)
> lsmod | grep aloop output
> your .asoudrc content
$ lspci -vv # I only use the analog one, my HDMI monitor lacks loudspeakers
[...]
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia
(Intel HDA) (rev 40)
Subsystem: ASUSTeK Computer Inc. Device 8436
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
[...]
07:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Caicos HDMI Audio
[Radeon HD 6400 Series]
Subsystem: PC Partner Limited / Sapphire Technology Radeon HD 6450 1GB
DDR3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 101
Region 0: Memory at fe740000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 1/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 1/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ cat /etc/modprobe.d/alsa-base.conf
options snd cards_limit=3
alias snd-card-0 snd-aloop
alias snd-card-1 snd-hda-intel
options snd-aloop index=0 pcm_substreams=2
options snd-hda-intel index=1
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd && { /sbin/modprobe --quiet
snd-ioctl32 ; /sbin/modprobe --quiet snd-seq ; : ; }
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi && {
/sbin/modprobe --quiet snd-seq-midi ; : ; }
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 && {
/sbin/modprobe --quiet snd-emu10k1-synth ; : ; }
# Keep snd-pcsp from beeing loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
$ lsmod | grep aloop
snd_aloop 18131 4
snd_pcm 79941 8
snd_pcm_oss,snd_aloop,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd 60869 27
snd_hda_codec_realtek,snd_pcm_oss,snd_aloop,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
$ cat $HOME/.asoundrc
#------------------------------------------------------
# hardware 0,0 : used for ALSA playback
pcm.loophw00 {
type hw
card Loopback
device 0
subdevice 0
format S32_LE
rate 48000
}
# ------------------------------------------------------
# playback PCM device: using loopback subdevice 0,0
# Don't use a buffer size that is too small. Some apps
# won't like it and it will sound crappy
pcm.amix {
type dmix
ipc_key 219345
slave {
pcm loophw00
period_size 4096
periods 2
}
}
# ------------------------------------------------------
# software volume
pcm.asoftvol {
type softvol
slave.pcm "amix"
control { name PCM }
min_dB -51.0
max_dB 0.0
}
# ------------------------------------------------------
# for jack alsa_in: looped-back signal at other ends
pcm.cloop {
type hw
card Loopback
device 1
subdevice 0
format S32_LE
rate 48000
}
# ======================================================
# ------------------------------------------------------
# hardware 0,1 : used for ALSA capture
pcm.loophw01 {
type hw
card Loopback
device 0
subdevice 1
format S32_LE
rate 48000
}
# ------------------------------------------------------
# for jack alsa_out: looped-back signal at other end
pcm.ploop {
type hw
card Loopback
device 1
subdevice 1
format S32_LE
rate 48000
}
# ======================================================
# ------------------------------------------------------
# duplex device combining our PCM devices defined above
pcm.aduplex {
type asym
playback.pcm "asoftvol"
capture.pcm "loophw01"
}
# ------------------------------------------------------
# default device
pcm.!default {
type plug
slave.pcm aduplex
hint {
show on
description "Duplex Loopback"
}
}
1388045974.14857_0.ltw:2, <4777588.UfCqYUO964 at fx>