Re: [Jack-Devel] routing alsa through jack

PrevNext  Index
DateThu, 19 Dec 2013 17:01:14 +0100
From Lucio Crusca <[hidden] at sulweb dot org>
To[hidden] at lists dot jackaudio dot org
In-Reply-ToDominique Michel Re: [Jack-Devel] routing alsa through jack
Follow-UpDominique Michel Re: [Jack-Devel] routing alsa through jack
In data mercoledì 18 dicembre 2013 23:27:21, Dominique Michel ha scritto:
> I think no part must be ignored. This article is about routing JACK and
> ALSA together.

Ok thanks, I'm now following that guide and I'm getting closer. The problem 
here is that if I have this in my /etc/modprobe.d/alsa-base.conf 

options snd-aloop index=0 pcm_substreams=2

then I get

# modprobe snd-aloop
ERROR: could not insert 'snd_aloop': No such device

but it works if I omit the options in /etc/modprobe.d/alsa-base.conf. Please 
note that I've already tried rebooting several times with and without the 
options in place, same result.

Moreover, if I

# alsa force-unload
Unloading ALSA sound driver modules: snd-pcm-oss snd-hda-codec-hdmi snd-hda-
codec-realtek snd-hda-intel snd-hda-codec snd-hwdep snd-mixer-oss snd-pcm snd-
page-alloc snd-timer (failed: modules still loaded: snd-hda-codec-hdmi snd-
hda-codec-realtek snd-hda-intel snd-hda-codec snd-hwdep snd-mixer-oss snd-pcm 
snd-page-alloc snd-timer).

# rmmod snd-pcm-oss snd-hda-codec-hdmi snd-hda-codec-realtek snd-hda-intel 
snd-hda-codec snd-hwdep snd-mixer-oss snd-pcm snd-page-alloc snd-timer
Error: Module snd_pcm_oss is not currently loaded
Error: Module snd_hda_codec_hdmi is in use
Error: Module snd_hda_codec_realtek is in use
Error: Module snd_hda_intel is in use
Error: Module snd_hda_codec is in use by: snd_hda_codec_realtek 
snd_hda_codec_hdmi snd_hda_intel
Error: Module snd_hwdep is in use by: snd_hda_codec
Error: Module snd_mixer_oss is in use
Error: Module snd_pcm is in use by: snd_hda_codec_hdmi snd_hda_codec 
snd_hda_intel
Error: Module snd_page_alloc is in use by: snd_pcm snd_hda_intel
Error: Module snd_timer is in use by: snd_pcm

In /var/log/dmesg.log I have

[   21.865605] cannot find the slot for index 0 (range 0-1), error: -16
[   21.865851] snd_aloop: probe of snd_aloop.0 failed with error -16
[   21.865893] aloop: No loopback enabled

What am I doing wrong?
PrevNext  Index

1387468889.9092_0.ltw:2, <3811847.fQ1onxVlec at fx>