[Jack-Devel] ALSA merged audio device:
This is my first post to this list -- thanks in advance for advice.
I'm trying to configure Jack 1.9.6 on Ubuntu 10.04 (with real-time kernel) to
use all four channels of an M-Audio fast track pro. The class-compliant USB
audio driver reads a pair of stereo devices:
card 1: Pro [FastTrack Pro], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: Pro [FastTrack Pro], device 1: USB Audio [USB Audio #1]
Subdevices: 1/1
Subdevice #0: subdevice #0
I've set up a merged device in .asoundrc and tested directly against alsa, no
problem:
1. Play a stereo, 44.1 kHz, 16 bit file to hw:1,0.
2. Play the same file to hw:1,1.
3. Use SuperCollider to make a four channel version of the same file, and play
this to the merged device.
All of these tests are successful -- so I think the .asoundrc configuration is
correct.
Jack can use either of the stereo devices -- hw:1,0 or hw:1,1 -- for playback
with no problem. I've been using that successfully for almost two years now.
But... (-Chw:1,1 is for the FTPro's stereo input)
/usr/bin/jackd -S -P60 -dalsa -r44100 -p1024 -n2 -D -Chw:1,1 -Pft4 -s
... gives me:
~~~
JACK server starting in realtime mode with priority 60
audio_reservation_init
Acquire audio card Audio1
creating alsa driver ...
ft4|hw:1,1|1024|2|44100|0|0|nomon|swmeter|soft-mode|32bit
Using ALSA driver USB-Audio running on card 1 - M-Audio FastTrack Pro at
usb-0000:00:1d.0-1.5, full speed
configuring for 44100Hz, period = 1024 frames (23.2 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 16bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 16bit little-endian
ALSA: use 2 periods for playback
ALSA: could not start playback (Broken pipe)
Cannot start driver
JackServer::Start() failed with -1
Released audio card Audio1
audio_reservation_finish
Failed to start server
~~~
Any ideas what I'm missing?
Thanks,
hjh
1339747822.4904_0.ltw:2,a <loom.20120615T093843-195 at post dot gmane dot org>