Using JACK on Windows
As on other platforms, JACK on Windows is a multi-purpose application that connects audio and MIDI using the Windows system drivers… It connects (OUTPUT) to those audio drivers using the PortAudio project (so Jack can connect using dsound, wmme, WDMKS, ASIO, WASAPI, and WaveRT) depending on what the soundcard’s drivers support. Currently Jack for Windows only supports 32-bit applications, but a new version is currently being tested that supports both 32-bit and 64-bit audio applications. If you are working with 64-bit applications then contact the Jack Developers list for more information.
JACK is an Audio API (Application Programming Interface) that can be used natively by audio application developers. There are already some existing native JACK for Windows applications (that is audio applications that use the JACK API directly). Through the API, Jack for Windows offers native Jack connections (INPUT), and the JackRouter ASIO driver (INPUT) that offers an ASIO linker to the Jack Audio Server.
So any ASIO application will be able to use the JackRouter ASIO linker to connect to Jack, and Jack can then be used to route that audio to other applications connected to the Jack Audio Server, or out to the system sound device.
Several applications have native Jack support:
- Harisson MixBus
- Fluidsynth for Windows (part of the jOrgan Windows packages).
- JNAJack, Java bindings for JACK
Native Jack applications can make use of the full power of the JACK audio and MIDI connection system (for instance, they can open or close Jack connections from within the application, rather than having to set an ASIO driver to use use JackRouter), also, the use of natively provided Jack ports provides the ability to sync audio streams between applications.
The JackRouter ASIO driver is “only” there so that users are able to use ASIO applications in the Windows context of JACK, but this connection obviously has some limitations that native applications won’t have.
Jack uses a ‘Server <-> Client’ architecture to supply the audio connection between your sound device and the ASIO application(s). When you run Jack PortAudio, this starts the Jack Audio Server. Once the Jack Audio Server is running, the JackRouter driver is then able to create connections between clients (ASIO applications) and the Jack Audio Server. These connections can be seen in the Jack Control -> Connect Screen.
If the Jack Audio Server is not running, then JackRouter will not be available to your ASIO application(s), and an error report may be shown.
Starting from 1.9.8 version, the installer exists in two versions:
- A pure 32 bit version to be used with older systems (typically XP).
- A mixed 64/32 bit version that will allow 64 and 32 bit applications to be used at the same time with a running 64 bit JACK server.
By default, JackRouter is set to provide 4 Input and 4 Output connections.
This setting can be customized to suite your needs by editing the
JackRouter.ini file within your
C:\Program Files\Jack\32bits (or
folder depending of the JackRouter 32 or 64 bit version). In
Windows Explorer, right click on the file and choose the ‘Edit’ option.
Change the settings in the [IO] portion of the file.
Installation and Configuration
Download the Jack Audio Connection installer for Windows from the download page.
Use the installer (either the 32 bit or the mixed 64/32 bit one).
From the Windows Start menu, locate the Jack folder and right click on Jack Portaudio icon, then select ‘Send to Desktop’ (this will place a shortcut on your desktop)
Now go to your desktop and right click on the Jack PortAudio shortcut, and then select ‘Properties’ (use right click to open ‘Properties’)
- Add the following information to the ‘Target’ property:
"C:\Program Files\Jack\jackd.exe" -R -S -d portaudio -d "ASIO::ASIO4ALL v2"[This configures Jack to use the ASIO4ALL v2 driver, if you have another ASIO device then configure the ‘Target’ property with that device name. For a list of all the audio devices on your system that Jack can connect to, open a Command Prompt, change directory to the Jack folder (i.e. cd “c:\Program Files (x86)\Jack") then run this command: jackd -d portaudio -l (that’s an ‘ell’ for List, not a ‘one’), this will present you with the list of supported devices.]
- Click on OK.
- Again, from the Windows Start menu, locate the Jack folder and right click on the Jack Control icon, then select ‘Send to Desktop’ (placing a Jack Control shortcut on your desktop)
You will now have the Jack PortAudio icon (which starts the Jack Audio Connection Kit’s audio server), and the Jack Control icon (which allows you to configure the connections between ASIO programs and your hardware). The sequence of usage is to start with the Jack PortAudio icon, allow the audio server to start, and then start Jack Control.
When the Jack Audio Server is running (i.e. your Jack PortAudio command prompt window reports that Jack is starting and remains open), the JackRouter ASIO interface will be available to all ASIO capable applications.
For an overview of the command line options supported by the Jack Audio Server please see: manpage
The Jack v 1.9.8/64bits/JackRouter.dll still has to be registered “manually” with regsvr32 - so please try the following command to register the 64-bit JackRouter:
regsvr32 "C:\Program Files (x86)\Jack v1.9.8\64bits\JackRouter.dll"
Be sure to unregister previous versions before installing the new one.
Troubleshooting Tip. If you are unable to register the 64-bit
JackRouter, while in Windows Explorer navigate to
and right click on “cmd.exe” and chose “Run As Administrator” from the
context menu. The open a command prompt, navigated to
(x86)\Jack v1.9.8\64bits, and then enter regsvr32 JackRouter.dll at the
Use the provided uninstaller to install JACK from your machine. Note that because the 64-bit JackRouter had to be manually registered as described before, you’ll have to unregister it as well. Use the following command to unregister the 64-bit JackRouter:
regsvr32 /u "C:\Program Files (x86)\Jack v1.9.8\64bits\JackRouter.dll"
Connecting Audio Applications
- Start Jack PortAudio
- Make sure that the Jack Audio Server is running by checking the command prompt window for the report that will say something like this:
jackdmp 1.9.8 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2011 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK server starting in realtime mode with priority 10 Cannot lock down memory area (No error)
- With the Jack Audio Server started, the JackRouter ASIO driver will be available for your ASIO supported applications.
- Within your audio application, select JackRouter as the audio device.
- Now start Jack Control
- Click on the Connect button
- In the Audio tab window, on the left hand side you will see the Readable Clients (audio inputs to your computer) and Application Output ports (audio being routed into the Jack Audio Server via the JackRouter ASIO driver), and on the right hand side you will see the Writable Clients (audio outputs from your computer, i.e. your speaker ports) and Application Input ports (the ASIO audio-in ports from your applications configured with the JackRouter ASIO driver)
- To route the sound from your application to your speakers, click on the audio producing port (Readable) on the left hand side, then click on the audio output port (Writable i.e. system), and then click on the Connect button.
You can route the output of ASIO applications into the inputs of other ASIO applications (like a VST host application), and then connect the audio output of that application to your system output (or a combination of both).
Multiple channel audio is also supported, but may require more configuration than the simple setup described here.
A slave backend using the Windows MME MIDI API can be used. You will need to
-X winmme in the JACK command line, like for example:
jackd -S -X winmme -d portaudio. This can be done if starting JACK in a terminal, or by
-X winmme in the “Server Path” in QJackCtl setup.